Panels with a high quality mdf core

Shinnoki prefinished panels are made up of a top layer of veneer, an 18 mm (11/16”) MDF core and a balance layer on the back for stability. This range of wood veneered panels does not need any further finishing. There is almost no limit to the ways it can be used - from kitchens to wardrobes in the home market, and from offices to bars or restaurant furnishings in the project market.

Double-sided panels
These panels are finished the same way on both sides with the Shinnoki design and protection technology. They come with a transparent foil layer to protect the boards during transportation and handling that is simple to remove.

Single-sided panels
For application where only one side of the panel is constantly visible, the single-sided Shinnoki panels are a great cost-effective alternative. These boards are finished on one side with the Shinnoki design. To guarantee the stability, a balance veneer is needed. We chose for a technical veneer which is stained and lacquered to be a reasonably matching balancer pertaining to the front side. Both sides have a protective foil which is easy to remove.

2790 x 1240 x 19 mm (4' x 9' x 3/4" - 48.8" x 109.8")

Download matrix

Veneered laminates for unlimited possibilities

Shinnoki prefinished veneered laminates are made up of stained and lacquered real wood veneers laminated to a paper impregnated with a phenolic resin. The result is a firm but still bendable product that can be applied as easy as a HPL decorative laminate. They are ideal for applications such as interior doors and where specific substrates are required and thus a perfect complement to Shinnoki panels.

2150 x 1000 x 1 mm (3' x 7' x 1/17")
3050 x 1220 x 1 mm (4' x 10' x 1/17")

Download matrix

The perfect edge finish

For seamless edge finishing, you can rely on our range of prefinished edge bandings in various colors and styles. There are both ABS strips and veneer strips available. The veneered edges guarantee a refined finish while the ABS one ideal for applications with intensive use.

Veneer 0,6mm available in height 24 or 48 mm (15/16" or 1 5/8") x 100 m (328 ft)
ABS 1mm available in height 24 or 48 mm (15/16" or 1 5/8") x 50 m (164 ft)

Download matrix

Absorb and reduce noise with acoustic panels*

*US market exclusive as from summer 2020

Shinnoki Acoustics offers prefinished acoustically absorbing panels, developed to absorb and reduce any disturbing sounds in a room. This leads to greater acoustic comfort, even in highly frequented rooms with much background noise. Resonance and bad acoustics in a room are a disturbing factor in many environments. That is why our product is used in a wide range of large and small projects.

Available colours as from April: Natural Oak, Ivory Oak, Milk Oak, Desert Oak, Manhattan Oak, Mineral Triba, Frozen Walnut, Smoked Walnut

Finished product size: 3000x1200x18mm (118.11' x 50' x 0.70')

More information can be downloaded below. Should you still have some questions or require a sample, reach out to us via our contact form.

Download information sheet

Ready to use veneered panels for interior

Shinnoki is a range of ready-to-use veneered panels for interior applications marked by contemporary designs, a high and consistent quality, easy processing and inexpensive. Shinnoki has the desired look and benefits of a panel made with solid hardwood lumber, without any of the disadvantages.

Shinnoki panels guarantee uniform quality with the natural, lively appearance of wood, both visually and sensorial. They fit easily into any commercial, retail, hopitality or residential project and offers limitless possibilities for millwork applications such as kitchen cabinets, wardrobes and office interiors.

Important for Shinnoki is the mixmatch technique. By combining wood veneer from different trees and with varying slicing techniques, one obtains continuous surfaces without optical interruptions. The result is a uniform quality without compromising on the vibrant aspect of wood.

A genuine wood top layer

The top layer of Shinnoki is a sheet of real wood veneer, assembled according our unique mixmatch technique. The surface is gently brushed, stained and lacquered with a soft-touch acrylate urethane lacquer. The result is a pleasant touching surface where the protection, the natural feel and exclusive appearance of the wood are well-balanced.

What is mixmatch?

In order to obtain a uniform surface, with different pieces of furniture forming a whole, wood veneer from different trees with varying slicing techniques is selected and randomly spliced into a sheet. Thus we get a view of a solid wood without the downsides such as weight and curvature. Each board is different and yet matching, which leads to more ease of use and less trouble.

Veneer grading

We are experts in the processing of veneer and apply this know-how for the production of Shinnoki. In the entire process from raw material to finished product, quality is never lost sight of. Of course, everything starts with the choice of the right veneer. For this we appeal to the experience of our team of wood specialists who sort the wood to find the best quality. Only the purest wood succeeds the strict inspections and makes it into a Shinnoki product!

Aim for a good indoor air quality

For the production of Shinnoki we use only water-based stains, glues without VOC (Volatile Organic Compounds) and lacquer with a minimum of solvants. This allows Shinnoki to earn an A+ emissions grade in Europe!

Overview of international VOC-tests Shinnoki passed: